blue buckets wholesale

Plastic bucket wall thickness of the main factors to ensure its performance

 

     For plastic barrel, the wall thickness and its distribution is a major factor in product performance guarantee. Different thickness have different rules, like minimum wall thickness can not appear in the product line at the bottom and the mold, to fully consider the thickness distribution of the product, set a different wall thickness at different positions in order to ensure a certain standard of product weight and meet the performance requirements under the premise.

     Under normal circumstances the parting line at the bottom of the barrel Shandong plastic bucket should be the thickest, the minimum wall thickness should be in the corners of the product, but generally lower than the angle of the bottom corner should be thicker at the top; the thickness of the product should be higher than the lower portion the upper portion to be bigger. You can decide to use symmetric parts according to the product or the thickness ratio of the thickness difference to test the thickness uniformity of the product, if the assessment symmetric parts thickness ratio of 1: 1.5 should be the upper limit.

    Simple, Shandong plastic bucket The quality depends mainly see the wall thickness, the mouth end face, mouth and mouth height with screw cap structure level.


Plastic Buckets Suppliers, China Plastic bucket factory   www.plasticbucketmanufacturers.com/lid/